Description |
Audio/video baluns provide an economical alternative to coaxial cables for long length audio/video installations. Baluns are able to maintain a critical 75 Ohm Impedance to audio/video devices while providing 100 Ohm Impedance to the cabling infrastructure. This balanced impedance allows the audio/video signals to travel with little to no degradation up to 300ft over more affordable unshielded twisted pair Cat5 cabling (Up to 500ft over Cat6).
When connected to the distribution hub, this receiver is able to receive Component Video, Digital Audio, Left/Right Audio and IR Emitter transmission over two common Cat5 cables. It features RCA jacks for audio, Component Video, and S/PDIF connections and a 3.5mm jack for IR Emitter connections. Indicator LEDs on the front confirm that a Component Video signal is present. Cable length equalizer circuitry is adjustable for optimum picture viewing. The transmitter unit (sold separately - #41167) is required on the source end to complete the installation
Features:- Rugged Metal Cabinet
- Discrete Passive IR Channel for the use of external IR remote control systems
- Cable length equalizer
- Video Continuity LEDs to ensure video signal
Specifications:- Video:
- Input Impedance: 75 ohms
- Output Impedance: 75 ohms
- Video Bandwidth: 50MHz
- Distance: 300ft @1080i (500 feet with Cat6 cable)
- Audio (Analog):
- Input Impedance: 22kohm
- Output Impedance: 1kohm
- Frequency Response: 20Hz~20 kHz
- Signal to Noise: 80dB@1volts out
- Audio (Digital)
- Supports standard S/PDIF digital audio
|
* Product stock is always subject to change.
|
Cart
